|
[Rivet] installation of RivetAndy Buckley andy.buckley at cern.chMon Jun 22 07:36:17 BST 2015
It changed to run-pythia in recent Sacrifice releases. Andy On 22/06/15 00:00, Debottam Bakshi Gupta wrote: > Hi Deepak, > > After sourcing the sacrificeenv-genser.sh file, am I supposed to get any > output for command $ pythia --help? > > Thanks, > Debottam. > > On Sun, Jun 21, 2015 at 5:47 PM, Deepak Kar <deepak.kar at cern.ch > <mailto:deepak.kar at cern.ch>> wrote: > > source > /afs/cern.ch/sw/lcg/external/MCGenerators_lcgcmt67c/sacrifice/0.9.9/x86_64-slc6-gcc47-opt/sacrificeenv-genser.sh > <http://cern.ch/sw/lcg/external/MCGenerators_lcgcmt67c/sacrifice/0.9.9/x86_64-slc6-gcc47-opt/sacrificeenv-genser.sh> > > On Mon, Jun 22, 2015 at 12:46 AM, Debottam Bakshi Gupta > <debottam.gupta at gmail.com <mailto:debottam.gupta at gmail.com>> wrote: > > Hi, > > > > Thanks. Could anyone provide me some links on getting Sacrifice (right > > version) and running Pythia? > > > > Best regards, > > Debottam. > > > > On Sun, Jun 21, 2015 at 4:05 PM, Andy Buckley > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> wrote: > >> > >> Sounds like you need to start again in a clean folder, and set up a > >> Python 2.7 environment before running the bootstrap script (and again > >> every time you want to source rivetenv.sh). Or I think just > avoiding the > >> ATLAS setup scripts and running with the vanilla lxplus6 compiler and > >> Python should also work (it did for me). > >> > >> Andy > >> > >> > >> On 21/06/15 02:41, Debottam Bakshi Gupta wrote: > >> > Hi Chris, > >> > > >> > I forgot to mention, I do get a warning when I do the following: > >> > > >> > $ rivet --help > >> > > >> > > >> > > /afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py:12 > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py:12> > >> > > >> > > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py:12>: > >> > RuntimeWarning: compiletime version 2.6 of module 'rivet.core' > does not > >> > match runtime version 2.7 > >> > > >> > Thanks, > >> > Debo. > >> > > >> > On Sat, Jun 20, 2015 at 1:18 AM, Chris Pollard > <cpollard at cern.ch <mailto:cpollard at cern.ch> > >> > <mailto:cpollard at cern.ch <mailto:cpollard at cern.ch>>> wrote: > >> > > >> > Hi Debottam, > >> > > >> > localSetupPython is setting up a very out-of-date version > of python > >> > (2.5, i686, gcc4.3). You should run > >> > > >> > $ localSetupPython --help > >> > > >> > This will give you a list of available python versions on that > >> > system. After that you can set the python version by hand; for > >> > instance, I usually set up 2.7.4-x86_64-slc6-gcc48: > >> > > >> > $ localSetupPython 2.7.4-x86_64-slc6-gcc48 > >> > > >> > Can you give that a try then attempt to import rivet again? > >> > > >> > Chris > >> > > >> > On Sat, Jun 20, 2015 at 3:55 AM, Debottam Bakshi Gupta > >> > <debottam.gupta at gmail.com <mailto:debottam.gupta at gmail.com> > <mailto:debottam.gupta at gmail.com <mailto:debottam.gupta at gmail.com>>> > wrote: > >> > > >> > Hi Dr. Buckley, > >> > > >> > I did the following : > >> > > >> > >ssh -X -Y dbakshig at lxplus6.cern.ch > <mailto:dbakshig at lxplus6.cern.ch> > >> > <mailto:dbakshig at lxplus6.cern.ch > <mailto:dbakshig at lxplus6.cern.ch>> //that's how I log in to > >> > lxplus6 > >> > > >> > >localSetupPython //didn't > mention > >> > any version > >> > > >> > output: Setting up Python version 2.5.4p2-i686-slc5-gcc43 > >> > > >> > >source ~/Rivet/local/rivetenv.sh > >> > > >> > >python > >> > >>> import rivet > >> > > >> > Traceback (most recent call last): > >> > > >> > File "<stdin>", line 1, in <module> > >> > > >> > File > >> > > >> > > "/afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py> > >> > > >> > > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py>", > >> > line 12, in <module> > >> > > >> > from rivet.core import * > >> > > >> > ImportError: > >> > > >> > > /afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/core.so > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/core.so> > >> > > >> > > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/core.so>: > >> > wrong ELF class: ELFCLASS64 > >> > > >> > Thanks, > >> > Debo. > >> > > >> > On Fri, Jun 19, 2015 at 6:09 PM, Andy Buckley > >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>>> wrote: > >> > > >> > I'm not sure what is going on here --- it worked > fine for > >> > me, using the > >> > lxplus6 system Python. You could try enabling a newer > >> > version of Python > >> > either manually or via the ATLAS localSetupPython > command if > >> > you have > >> > that available. > >> > > >> > Can you also try sourcing rivetenv.sh, then running > "python" > >> > and try > >> > "import rivet" at the Python interactive prompt? > This should > >> > give some > >> > error messages suppressed in the rivet script, > which should > >> > hint at what > >> > is going wrong. > >> > > >> > Andy > >> > > >> > > >> > On 19/06/15 03:00, Debottam Bakshi Gupta wrote: > >> > > Hi Dr. Buckley, > >> > > > >> > > There is another issue I used the command > >> > FASTJET_VERSION=3.0.3 > >> > > ./rivet-bootstrap-lcg. Now I tried to set > environment on > >> > my lxplus home > >> > > directory > >> > > > >> > >>source ~/Rivet/local/rivetenv.sh > >> > > > >> > > Then I tried following > >> > > > >> > >>rivet --help > >> > > "The rivet Python module could not be loaded: is your > >> > PYTHONPATH set > >> > > correctly?" > >> > > > >> > > I have attached the installation log file. Is it > because > >> > of an older > >> > > version of python? > >> > > > >> > > Thanks, > >> > > Debo > >> > > > >> > > On Wed, Jun 17, 2015 at 8:59 AM, Andy Buckley > >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> > >> > > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>>> wrote: > >> > > > >> > > Hi Debottam, > >> > > > >> > > Ok, thanks for confirming. I tried it myself and > >> > reproduced the problem. > >> > > > >> > > The quick fix, I think, will be to use an > even earlier > >> > version of > >> > > FastJet, since the installation of 3.0.6 in > the LCG > >> > area is (for some > >> > > strange reason) only for SLC5! Here's a > version of the > >> > command which > >> > > should do that version change without you > needing to > >> > edit anything: > >> > > > >> > > FASTJET_VERSION=3.0.3 ./rivet-bootstrap-lcg > >> > > > >> > > This worked for me, and I will update the > bootstrap > >> > script to use 3.0.3 > >> > > by default. I've also asked the LCG applications > >> > manager what's going on > >> > > with the FastJet builds, since the 3.1. > series has > >> > been available for > >> > > nearly a year and the latest SLC6 build is *three > >> > years* old!!! Maybe > >> > > they have switched to putting their FastJet > builds > >> > somewhere else, > >> > > without leaving any signposts in the old > directory... > >> > I'll find out. > >> > > > >> > > Cheers, > >> > > Andy > >> > > > >> > > > >> > > > >> > > On 17/06/15 02:23, Debottam Bakshi Gupta wrote: > >> > > > Hi Dr. Buckley, > >> > > > > >> > > > Yes I am doing it in lxplus. I logged in to > lxplus > >> > and created a folder > >> > > > named Rivet in my home directory and there > I wrote > >> > the command > >> > > > > >> > > > wget > >> > > >> > > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg > >> > > > chmod +x rivet-bootstrap-lcg > >> > > > > >> > > > and then > >> > > > > >> > > > ./rivet-bootstrap-lcg. > >> > > > > >> > > > Thanks, > >> > > > > >> > > > Debo. > >> > > > > >> > > > > >> > > > > >> > > > On Tue, Jun 16, 2015 at 3:34 PM, Andy Buckley > >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>> > >> > > > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>>>> wrote: > >> > > > > >> > > > Did you do this on lxplus? > >> > > > > >> > > > rivet-bootstrap-lcg is for use on > systems where > >> > the /afs/cern.ch <http://cern.ch> <http://cern.ch> > <http://cern.ch> > >> > > > <http://cern.ch> > >> > > > filesystem is visible, and it will try > to pick > >> > up all the external > >> > > > packages like FastJet from there. If you're > >> > building on a laptop or > >> > > > other system without AFS, use the > >> > rivet-bootstrap script instead. > >> > > > > >> > > > Andy > >> > > > > >> > > > > >> > > > On 16/06/15 18:51, Debottam Bakshi > Gupta wrote: > >> > > > > Hi Dr. Buckley, > >> > > > > > >> > > > > I did the following > >> > > > > > >> > > > > wget > >> > > >> > > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg > >> > > > > chmod +x rivet-bootstrap-lcg > >> > > > > > >> > > > > and then > >> > > > > > >> > > > > ./rivet-bootstrap-lcg > >> > > > > > >> > > > > it gave me the output (please see the > attached > >> > .txt file) with > >> > > > > > >> > > > > ...................... > >> > > > > configure: WARNING: fastjet library > was not > >> > found > >> > > > > configure: error: FastJet is required > >> > > > > > >> > > > > Thanks, > >> > > > > > >> > > > > Debo. > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > On Tue, Jun 16, 2015 at 12:02 PM, > Andy Buckley > >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>> > >> > > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>> <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>>> > >> > > > > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>> <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>> > >> > > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>> <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch> > >> > <mailto:andy.buckley at cern.ch > <mailto:andy.buckley at cern.ch>>>>>> wrote: > >> > > > > > >> > > > > On 16/06/15 16:49, Debottam > Bakshi Gupta > >> > wrote: > >> > > > > > Hi Deepak, > >> > > > > > > >> > > > > > It would be great if you > provide me with > >> > some details > >> > > > because I am doing > >> > > > > > this for the 1st time, please > see the > >> > following. > >> > > > > > > >> > > > > > * > >> > > > > > I did > >> > > > > > > >> > > > > > cd /scratch/rivet > >> > > > > > wget > >> > > > > >> > > > >> > > >> > > http://rivet.hepforge.org/hg/bootstrap/raw-file/1.9.0/rivet-bootstrap-lcg > >> > > > > > chmod +x rivet-bootstrap-lcg > >> > > > > > > >> > > > > > **Where Fastjet was installed > when I ran > >> > > > > > > >> > > > > > ./rivet-bootstrap-lcg > >> > > > > > > >> > > > > > Q?? which should I use version > 1.9.0 or > >> > 2.2.1. > >> > > > > > >> > > > > Definitely 2.2.1! > >> > > > > > >> > > > > > In case of 2.2.1 if I > >> > > > > > need to install Fastjet > separately and > >> > how? > >> > > > > > >> > > > > It should be automatically > downloaded and > >> > installed by the > >> > > > bootstrap -- > >> > > > > was it not? > >> > > > > > >> > > > > > When I installed version 1.9.0 > I tried > >> > to use this command > >> > > > > > > >> > > > > >> agile-runmc --help > >> > > > > > > >> > > > > > And it could not find agile-runmc > >> > command > >> > > > > > >> > > > > We don't install AGILe anymore, > since the > >> > world mostly moved > >> > > > on from the > >> > > > > Fortran MC generators and the LCG > >> > directory structure that > >> > > > contained > >> > > > > them has also changed. We might bring > >> > AGILe back to life at > >> > > > some point, > >> > > > > but there's not a lot of demand (i.e. > >> > no-one has asked!) > >> > > > > > >> > > > > If you want a generator code to > try out, I > >> > think Pythia8 is > >> > > > the easiest > >> > > > > to install and use. Sherpa and > Herwig++ > >> > are also quite > >> > > easy to > >> > > > install > >> > > > > -- not *quite* as easy -- but > they are > >> > more configurable, > >> > > > which means a > >> > > > > bit more complexity. > >> > > > > > >> > > > > > Q?? do I need to download any > >> > dependencies for this. > >> > > because > >> > > > I simply > >> > > > > > want run at the beginning the > following > >> > code given in > >> > > > > > > >> > https://rivet.hepforge.org/trac/wiki/FirstRivetRun. > >> > > > > > > >> > > > > >> mkfifo fifo.hepmc > >> > > > > >> agile-runmc Pythia6:425 > >> > --beams=LHC:7000 -n 500000 -o > >> > > > fifo.hepmc & > >> > > > > >> rivet --analysis=ANALYSIS_NAME > >> > fifo.hepmc > >> > > > > > >> > > > > Ah, I see: we should update that > example > >> > to not mention > >> > > > agile-runmc... > >> > > > > > >> > > > > > Could you just let me know what > are the > >> > dependencies I > >> > > need > >> > > > to install > >> > > > > > to run the above code?? > >> > > > > > >> > > > > Hopefully the bootstrap will download > >> > everything you need, > >> > > > other than a > >> > > > > copy of Pythia8 or whichever > generator you > >> > prefer. I > >> > > find the > >> > > > Sacrifice > >> > > > > interface a nice way to steer > Pythia8 -- > >> > we have a link to > >> > > > that from the > >> > > > > Rivet web page, IIRC. > >> > > > > > >> > > > > Cheers, > >> > > > > Andy > >> > > > > > >> > > > > > >> > > > > > On Tue, Jun 16, 2015 at 10:26 > AM, Deepak > >> > Kar > >> > > > <deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>> > >> > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>>> > >> > > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>> > >> > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>>>> > >> > > > > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> > >> > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> > >> > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>>> > >> > > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>> > >> > > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com> > >> > <mailto:deepak.kar at gmail.com > <mailto:deepak.kar at gmail.com>>>>>>> wrote: > >> > > > > > > >> > > > > > Please see inline. > >> > > > > > > >> > > > > > On Tue, Jun 16, 2015 at > 5:07 PM, > >> > Debottam Bakshi Gupta > >> > > > > > > <debottam.bakshi.gupta at cern.ch <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>>> > >> > > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>> > >> > > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>>>> > >> > > > > > > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>> > >> > > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>>> > >> > > > > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>> > >> > > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>> > >> > > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch> > >> > <mailto:debottam.bakshi.gupta at cern.ch > <mailto:debottam.bakshi.gupta at cern.ch>>>>>>> wrote: > >> > > > > > > Hi helpers, > >> > > > > > > > >> > > > > > > I am trying to install > Rivet on my > >> > lxplus area. > >> > > I am following instructions > >> > > > > > > from > >> > > > https://rivet.hepforge.org/trac/wiki/GettingStarted > >> > > > > > > > >> > > > > > > step1: > >> > > > > > > > >> > > > > > > cd /scratch/rivet > >> > > > > > > wget > >> > > > > > > > >> > > > >> > > >> > > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg > >> > > > > > > chmod +x > rivet-bootstrap-lcg > >> > > > > > > > >> > > > > > > step2: > >> > > > > > > > >> > > > > > > nano rivet-bootstrap-lcg > ## and > >> > edit... > >> > > > > > > > >> > > > > > > Q?? do I need to change > anything > >> > in > >> > > rivet-bootstrap-lcg script?? > >> > > > > > > > >> > > > > > > >> > > > > > Not really if you dont want to > >> > update any of the > >> > > package versions. > >> > > > > > > >> > > > > > > step3: > >> > > > > > > > >> > > > > > > ./rivet-bootstrap-lcg > >> > > > > > > > >> > > > > > > Q?? it runs but at the > end shows > >> > following: > >> > > > > > > > >> > ............................................... > >> > > > > > > configure: WARNING: fastjet > >> > library was not found > >> > > > > > > configure: error: FastJet is > >> > required > >> > > > > > > >> > > > > > Self explanatory - you > can/should > >> > install fastjet > >> > > (will be needed for > >> > > > > > many analyses anyway) > >> > > > > > > >> > > > > > > > >> > > > > > > step4: > >> > > > > > > source > >> > Rivet/Rivet-2.2.1/rivetenv.sh.in > <http://rivetenv.sh.in> <http://rivetenv.sh.in> > >> > > <http://rivetenv.sh.in> <http://rivetenv.sh.in> > >> > > > > <http://rivetenv.sh.in> > >> > <http://rivetenv.sh.in> > >> > > > > > > >> > > > > > > >> > > > > > I usually source the > rivetenv.sh > >> > > > > > > >> > > > > > > > >> > > > > > > output: > >> > > > > > > -bash: export: > >> > `@LIBPATHVARNAME@=@libdir@:@ > >> > > > > > > > >> > > > > > > > >> > > > >> > > >> > > YODALIBPATH@:@HEPMCLIBPATH@:@FASTJETLIBPATH@:@GSLLIBPATH@:LIBPATHVARNAME@': > >> > > > > > > not a valid identifier > >> > > > > > > > >> > > > > > > >> > > > > > Best, > >> > > > > > Deepak > >> > > > > > > >> > > > > > > Could you please help? > >> > > > > > > > >> > > > > > > Thanks, > >> > > > > > > Debo. > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > > > > > > > >> > _______________________________________________ > >> > > > > > > Rivet mailing list > >> > > > > > > > Rivet at projects.hepforge.org <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>> > >> > > > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>>> > >> > > > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>> > >> > > > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>>>> > >> > > > > > > > >> > https://www.hepforge.org/lists/listinfo/rivet > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > -- > >> > > > > > Deepak Kar > >> > > > > > University of Witwatersrand > >> > > > > > Room PM15, School of Physics > >> > > > > > (0027) 011-7176958 (office) > (0027) > >> > 079-8401087 (mobile) > >> > > > > > > >> > > > > > While at CERN: > >> > > > > > Building 1, R-016 > >> > > > > > (0041) 0767321349 (mobile) > >> > > > > > > >> > > > > > While at USA: > >> > > > > > (001) 330-998-1500 > >> > <tel:330-998-1500> (mobile) > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > _______________________________________________ > >> > > > > > Rivet mailing list > >> > > > > > Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>> > >> > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>> > >> > > > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > >> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>>>>> > >> > > > > > > >> > https://www.hepforge.org/lists/listinfo/rivet > >> > > > > > > >> > > > > > >> > > > > > >> > > > > -- > >> > > > > Dr Andy Buckley, Lecturer / Royal > Society > >> > University > >> > > Research > >> > > > Fellow > >> > > > > Particle Physics Expt Group, > University of > >> > Glasgow > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > > > -- > >> > > > Dr Andy Buckley, Lecturer / Royal Society > >> > University Research > >> > > Fellow > >> > > > Particle Physics Expt Group, University of > >> > Glasgow > >> > > > > >> > > > > >> > > > >> > > > >> > > -- > >> > > Dr Andy Buckley, Lecturer / Royal Society > University > >> > Research Fellow > >> > > Particle Physics Expt Group, University of > Glasgow > >> > > > >> > > > >> > > >> > > >> > -- > >> > Dr Andy Buckley, Lecturer / Royal Society University > >> > Research Fellow > >> > Particle Physics Expt Group, University of Glasgow > >> > > >> > > >> > > >> > _______________________________________________ > >> > Rivet mailing list > >> > Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org> > <mailto:Rivet at projects.hepforge.org > <mailto:Rivet at projects.hepforge.org>> > >> > https://www.hepforge.org/lists/listinfo/rivet > >> > > >> > > >> > > >> > >> > >> -- > >> Dr Andy Buckley, Lecturer / Royal Society University Research Fellow > >> Particle Physics Expt Group, University of Glasgow > > > > > > > > -- > Deepak Kar > University of Witwatersrand > Room PM15, School of Physics > (0027) 011-7176958 (office) (0027) 079-8401087 (mobile) > > While at CERN: > Building 1, R-016 > (0041) 0767321349 (mobile) > > While at USA: > (001) 330-998-1500 <tel:330-998-1500> (mobile) > > -- Dr Andy Buckley, Lecturer / Royal Society University Research Fellow Particle Physics Expt Group, University of Glasgow
More information about the Rivet mailing list |