|
[Rivet] installation of RivetDeepak Kar deepak.kar at cern.chSun Jun 21 23:47:56 BST 2015
source /afs/cern.ch/sw/lcg/external/MCGenerators_lcgcmt67c/sacrifice/0.9.9/x86_64-slc6-gcc47-opt/sacrificeenv-genser.sh On Mon, Jun 22, 2015 at 12:46 AM, Debottam Bakshi Gupta <debottam.gupta at gmail.com> wrote: > Hi, > > Thanks. Could anyone provide me some links on getting Sacrifice (right > version) and running Pythia? > > Best regards, > Debottam. > > On Sun, Jun 21, 2015 at 4:05 PM, Andy Buckley <andy.buckley at cern.ch> wrote: >> >> Sounds like you need to start again in a clean folder, and set up a >> Python 2.7 environment before running the bootstrap script (and again >> every time you want to source rivetenv.sh). Or I think just avoiding the >> ATLAS setup scripts and running with the vanilla lxplus6 compiler and >> Python should also work (it did for me). >> >> Andy >> >> >> On 21/06/15 02:41, Debottam Bakshi Gupta wrote: >> > Hi Chris, >> > >> > I forgot to mention, I do get a warning when I do the following: >> > >> > $ rivet --help >> > >> > >> > /afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py:12 >> > >> > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py:12>: >> > RuntimeWarning: compiletime version 2.6 of module 'rivet.core' does not >> > match runtime version 2.7 >> > >> > Thanks, >> > Debo. >> > >> > On Sat, Jun 20, 2015 at 1:18 AM, Chris Pollard <cpollard at cern.ch >> > <mailto:cpollard at cern.ch>> wrote: >> > >> > Hi Debottam, >> > >> > localSetupPython is setting up a very out-of-date version of python >> > (2.5, i686, gcc4.3). You should run >> > >> > $ localSetupPython --help >> > >> > This will give you a list of available python versions on that >> > system. After that you can set the python version by hand; for >> > instance, I usually set up 2.7.4-x86_64-slc6-gcc48: >> > >> > $ localSetupPython 2.7.4-x86_64-slc6-gcc48 >> > >> > Can you give that a try then attempt to import rivet again? >> > >> > Chris >> > >> > On Sat, Jun 20, 2015 at 3:55 AM, Debottam Bakshi Gupta >> > <debottam.gupta at gmail.com <mailto:debottam.gupta at gmail.com>> wrote: >> > >> > Hi Dr. Buckley, >> > >> > I did the following : >> > >> > >ssh -X -Y dbakshig at lxplus6.cern.ch >> > <mailto:dbakshig at lxplus6.cern.ch> //that's how I log in to >> > lxplus6 >> > >> > >localSetupPython //didn't mention >> > any version >> > >> > output: Setting up Python version 2.5.4p2-i686-slc5-gcc43 >> > >> > >source ~/Rivet/local/rivetenv.sh >> > >> > >python >> > >>> import rivet >> > >> > Traceback (most recent call last): >> > >> > File "<stdin>", line 1, in <module> >> > >> > File >> > >> > "/afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py >> > >> > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/__init__.py>", >> > line 12, in <module> >> > >> > from rivet.core import * >> > >> > ImportError: >> > >> > /afs/cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/core.so >> > >> > <http://cern.ch/user/d/dbakshig/Rivet/local/lib/python2.6/site-packages/rivet/core.so>: >> > wrong ELF class: ELFCLASS64 >> > >> > Thanks, >> > Debo. >> > >> > On Fri, Jun 19, 2015 at 6:09 PM, Andy Buckley >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> wrote: >> > >> > I'm not sure what is going on here --- it worked fine for >> > me, using the >> > lxplus6 system Python. You could try enabling a newer >> > version of Python >> > either manually or via the ATLAS localSetupPython command if >> > you have >> > that available. >> > >> > Can you also try sourcing rivetenv.sh, then running "python" >> > and try >> > "import rivet" at the Python interactive prompt? This should >> > give some >> > error messages suppressed in the rivet script, which should >> > hint at what >> > is going wrong. >> > >> > Andy >> > >> > >> > On 19/06/15 03:00, Debottam Bakshi Gupta wrote: >> > > Hi Dr. Buckley, >> > > >> > > There is another issue I used the command >> > FASTJET_VERSION=3.0.3 >> > > ./rivet-bootstrap-lcg. Now I tried to set environment on >> > my lxplus home >> > > directory >> > > >> > >>source ~/Rivet/local/rivetenv.sh >> > > >> > > Then I tried following >> > > >> > >>rivet --help >> > > "The rivet Python module could not be loaded: is your >> > PYTHONPATH set >> > > correctly?" >> > > >> > > I have attached the installation log file. Is it because >> > of an older >> > > version of python? >> > > >> > > Thanks, >> > > Debo >> > > >> > > On Wed, Jun 17, 2015 at 8:59 AM, Andy Buckley >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> >> > > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch>>> wrote: >> > > >> > > Hi Debottam, >> > > >> > > Ok, thanks for confirming. I tried it myself and >> > reproduced the problem. >> > > >> > > The quick fix, I think, will be to use an even earlier >> > version of >> > > FastJet, since the installation of 3.0.6 in the LCG >> > area is (for some >> > > strange reason) only for SLC5! Here's a version of the >> > command which >> > > should do that version change without you needing to >> > edit anything: >> > > >> > > FASTJET_VERSION=3.0.3 ./rivet-bootstrap-lcg >> > > >> > > This worked for me, and I will update the bootstrap >> > script to use 3.0.3 >> > > by default. I've also asked the LCG applications >> > manager what's going on >> > > with the FastJet builds, since the 3.1. series has >> > been available for >> > > nearly a year and the latest SLC6 build is *three >> > years* old!!! Maybe >> > > they have switched to putting their FastJet builds >> > somewhere else, >> > > without leaving any signposts in the old directory... >> > I'll find out. >> > > >> > > Cheers, >> > > Andy >> > > >> > > >> > > >> > > On 17/06/15 02:23, Debottam Bakshi Gupta wrote: >> > > > Hi Dr. Buckley, >> > > > >> > > > Yes I am doing it in lxplus. I logged in to lxplus >> > and created a folder >> > > > named Rivet in my home directory and there I wrote >> > the command >> > > > >> > > > wget >> > >> > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg >> > > > chmod +x rivet-bootstrap-lcg >> > > > >> > > > and then >> > > > >> > > > ./rivet-bootstrap-lcg. >> > > > >> > > > Thanks, >> > > > >> > > > Debo. >> > > > >> > > > >> > > > >> > > > On Tue, Jun 16, 2015 at 3:34 PM, Andy Buckley >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> >> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> >> > > > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch> >> > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch>>>> wrote: >> > > > >> > > > Did you do this on lxplus? >> > > > >> > > > rivet-bootstrap-lcg is for use on systems where >> > the /afs/cern.ch <http://cern.ch> <http://cern.ch> >> > > > <http://cern.ch> >> > > > filesystem is visible, and it will try to pick >> > up all the external >> > > > packages like FastJet from there. If you're >> > building on a laptop or >> > > > other system without AFS, use the >> > rivet-bootstrap script instead. >> > > > >> > > > Andy >> > > > >> > > > >> > > > On 16/06/15 18:51, Debottam Bakshi Gupta wrote: >> > > > > Hi Dr. Buckley, >> > > > > >> > > > > I did the following >> > > > > >> > > > > wget >> > >> > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg >> > > > > chmod +x rivet-bootstrap-lcg >> > > > > >> > > > > and then >> > > > > >> > > > > ./rivet-bootstrap-lcg >> > > > > >> > > > > it gave me the output (please see the attached >> > .txt file) with >> > > > > >> > > > > ...................... >> > > > > configure: WARNING: fastjet library was not >> > found >> > > > > configure: error: FastJet is required >> > > > > >> > > > > Thanks, >> > > > > >> > > > > Debo. >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > >> > > > > On Tue, Jun 16, 2015 at 12:02 PM, Andy Buckley >> > <andy.buckley at cern.ch <mailto:andy.buckley at cern.ch> >> > <mailto:andy.buckley at cern.ch <mailto:andy.buckley at cern.ch>> >> > > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch> <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch>>> >> > > > > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch> <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch>> >> > > <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch> <mailto:andy.buckley at cern.ch >> > <mailto:andy.buckley at cern.ch>>>>> wrote: >> > > > > >> > > > > On 16/06/15 16:49, Debottam Bakshi Gupta >> > wrote: >> > > > > > Hi Deepak, >> > > > > > >> > > > > > It would be great if you provide me with >> > some details >> > > > because I am doing >> > > > > > this for the 1st time, please see the >> > following. >> > > > > > >> > > > > > * >> > > > > > I did >> > > > > > >> > > > > > cd /scratch/rivet >> > > > > > wget >> > > > >> > > >> > >> > http://rivet.hepforge.org/hg/bootstrap/raw-file/1.9.0/rivet-bootstrap-lcg >> > > > > > chmod +x rivet-bootstrap-lcg >> > > > > > >> > > > > > **Where Fastjet was installed when I ran >> > > > > > >> > > > > > ./rivet-bootstrap-lcg >> > > > > > >> > > > > > Q?? which should I use version 1.9.0 or >> > 2.2.1. >> > > > > >> > > > > Definitely 2.2.1! >> > > > > >> > > > > > In case of 2.2.1 if I >> > > > > > need to install Fastjet separately and >> > how? >> > > > > >> > > > > It should be automatically downloaded and >> > installed by the >> > > > bootstrap -- >> > > > > was it not? >> > > > > >> > > > > > When I installed version 1.9.0 I tried >> > to use this command >> > > > > > >> > > > > >> agile-runmc --help >> > > > > > >> > > > > > And it could not find agile-runmc >> > command >> > > > > >> > > > > We don't install AGILe anymore, since the >> > world mostly moved >> > > > on from the >> > > > > Fortran MC generators and the LCG >> > directory structure that >> > > > contained >> > > > > them has also changed. We might bring >> > AGILe back to life at >> > > > some point, >> > > > > but there's not a lot of demand (i.e. >> > no-one has asked!) >> > > > > >> > > > > If you want a generator code to try out, I >> > think Pythia8 is >> > > > the easiest >> > > > > to install and use. Sherpa and Herwig++ >> > are also quite >> > > easy to >> > > > install >> > > > > -- not *quite* as easy -- but they are >> > more configurable, >> > > > which means a >> > > > > bit more complexity. >> > > > > >> > > > > > Q?? do I need to download any >> > dependencies for this. >> > > because >> > > > I simply >> > > > > > want run at the beginning the following >> > code given in >> > > > > > >> > https://rivet.hepforge.org/trac/wiki/FirstRivetRun. >> > > > > > >> > > > > >> mkfifo fifo.hepmc >> > > > > >> agile-runmc Pythia6:425 >> > --beams=LHC:7000 -n 500000 -o >> > > > fifo.hepmc & >> > > > > >> rivet --analysis=ANALYSIS_NAME >> > fifo.hepmc >> > > > > >> > > > > Ah, I see: we should update that example >> > to not mention >> > > > agile-runmc... >> > > > > >> > > > > > Could you just let me know what are the >> > dependencies I >> > > need >> > > > to install >> > > > > > to run the above code?? >> > > > > >> > > > > Hopefully the bootstrap will download >> > everything you need, >> > > > other than a >> > > > > copy of Pythia8 or whichever generator you >> > prefer. I >> > > find the >> > > > Sacrifice >> > > > > interface a nice way to steer Pythia8 -- >> > we have a link to >> > > > that from the >> > > > > Rivet web page, IIRC. >> > > > > >> > > > > Cheers, >> > > > > Andy >> > > > > >> > > > > >> > > > > > On Tue, Jun 16, 2015 at 10:26 AM, Deepak >> > Kar >> > > > <deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>> >> > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>>> >> > > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>> >> > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>>>> >> > > > > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> >> > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> >> > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>>> >> > > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>> >> > > <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com> <mailto:deepak.kar at gmail.com >> > <mailto:deepak.kar at gmail.com>>>>>> wrote: >> > > > > > >> > > > > > Please see inline. >> > > > > > >> > > > > > On Tue, Jun 16, 2015 at 5:07 PM, >> > Debottam Bakshi Gupta >> > > > > > <debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>>> >> > > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>> >> > > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>>>> >> > > > > > >> > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>> >> > > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>>> >> > > > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>> >> > > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch> >> > > <mailto:debottam.bakshi.gupta at cern.ch >> > <mailto:debottam.bakshi.gupta at cern.ch>>>>>> wrote: >> > > > > > > Hi helpers, >> > > > > > > >> > > > > > > I am trying to install Rivet on my >> > lxplus area. >> > > I am following instructions >> > > > > > > from >> > > https://rivet.hepforge.org/trac/wiki/GettingStarted >> > > > > > > >> > > > > > > step1: >> > > > > > > >> > > > > > > cd /scratch/rivet >> > > > > > > wget >> > > > > > > >> > > >> > >> > http://rivet.hepforge.org/hg/bootstrap/raw-file/2.2.1/rivet-bootstrap-lcg >> > > > > > > chmod +x rivet-bootstrap-lcg >> > > > > > > >> > > > > > > step2: >> > > > > > > >> > > > > > > nano rivet-bootstrap-lcg ## and >> > edit... >> > > > > > > >> > > > > > > Q?? do I need to change anything >> > in >> > > rivet-bootstrap-lcg script?? >> > > > > > > >> > > > > > >> > > > > > Not really if you dont want to >> > update any of the >> > > package versions. >> > > > > > >> > > > > > > step3: >> > > > > > > >> > > > > > > ./rivet-bootstrap-lcg >> > > > > > > >> > > > > > > Q?? it runs but at the end shows >> > following: >> > > > > > > >> > ............................................... >> > > > > > > configure: WARNING: fastjet >> > library was not found >> > > > > > > configure: error: FastJet is >> > required >> > > > > > >> > > > > > Self explanatory - you can/should >> > install fastjet >> > > (will be needed for >> > > > > > many analyses anyway) >> > > > > > >> > > > > > > >> > > > > > > step4: >> > > > > > > source >> > Rivet/Rivet-2.2.1/rivetenv.sh.in <http://rivetenv.sh.in> >> > > <http://rivetenv.sh.in> <http://rivetenv.sh.in> >> > > > > <http://rivetenv.sh.in> >> > <http://rivetenv.sh.in> >> > > > > > >> > > > > > >> > > > > > I usually source the rivetenv.sh >> > > > > > >> > > > > > > >> > > > > > > output: >> > > > > > > -bash: export: >> > `@LIBPATHVARNAME@=@libdir@:@ >> > > > > > > >> > > > > > > >> > > >> > >> > YODALIBPATH@:@HEPMCLIBPATH@:@FASTJETLIBPATH@:@GSLLIBPATH@:LIBPATHVARNAME@': >> > > > > > > not a valid identifier >> > > > > > > >> > > > > > >> > > > > > Best, >> > > > > > Deepak >> > > > > > >> > > > > > > Could you please help? >> > > > > > > >> > > > > > > Thanks, >> > > > > > > Debo. >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > _______________________________________________ >> > > > > > > Rivet mailing list >> > > > > > > Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>> >> > > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>>> >> > > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>> >> > > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>>>> >> > > > > > > >> > https://www.hepforge.org/lists/listinfo/rivet >> > > > > > >> > > > > > >> > > > > > >> > > > > > -- >> > > > > > Deepak Kar >> > > > > > University of Witwatersrand >> > > > > > Room PM15, School of Physics >> > > > > > (0027) 011-7176958 (office) (0027) >> > 079-8401087 (mobile) >> > > > > > >> > > > > > While at CERN: >> > > > > > Building 1, R-016 >> > > > > > (0041) 0767321349 (mobile) >> > > > > > >> > > > > > While at USA: >> > > > > > (001) 330-998-1500 >> > <tel:330-998-1500> (mobile) >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > > >> > _______________________________________________ >> > > > > > Rivet mailing list >> > > > > > Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>> >> > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>> >> > > > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org> >> > <mailto:Rivet at projects.hepforge.org >> > <mailto:Rivet at projects.hepforge.org>>>> >> > > > > > >> > https://www.hepforge.org/lists/listinfo/rivet >> > > > > > >> > > > > >> > > > > >> > > > > -- >> > > > > Dr Andy Buckley, Lecturer / Royal Society >> > University >> > > Research >> > > > Fellow >> > > > > Particle Physics Expt Group, University of >> > Glasgow >> > > > > >> > > > > >> > > > >> > > > >> > > > -- >> > > > Dr Andy Buckley, Lecturer / Royal Society >> > University Research >> > > Fellow >> > > > Particle Physics Expt Group, University of >> > Glasgow >> > > > >> > > > >> > > >> > > >> > > -- >> > > Dr Andy Buckley, Lecturer / Royal Society University >> > Research Fellow >> > > Particle Physics Expt Group, University of Glasgow >> > > >> > > >> > >> > >> > -- >> > Dr Andy Buckley, Lecturer / Royal Society University >> > Research Fellow >> > Particle Physics Expt Group, University of Glasgow >> > >> > >> > >> > _______________________________________________ >> > Rivet mailing list >> > Rivet at projects.hepforge.org <mailto:Rivet at projects.hepforge.org> >> > https://www.hepforge.org/lists/listinfo/rivet >> > >> > >> > >> >> >> -- >> Dr Andy Buckley, Lecturer / Royal Society University Research Fellow >> Particle Physics Expt Group, University of Glasgow > > -- Deepak Kar University of Witwatersrand Room PM15, School of Physics (0027) 011-7176958 (office) (0027) 079-8401087 (mobile) While at CERN: Building 1, R-016 (0041) 0767321349 (mobile) While at USA: (001) 330-998-1500 (mobile)
More information about the Rivet mailing list |