[Rivet] rivet 2 on Mac OSX

Hannes Jung hannes.jung at cern.ch
Tue Jun 10 15:07:18 BST 2014
Previous message: [Rivet] rivet 2 on Mac OSX
Next message: [Rivet] rivet 2 on Mac OSX
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Dear Andy

thanks for not giving up ...

my build dir is:
~/jung/cvs/rivet2/build> ls
HepMC-2.06.09  README-hannes.bck  boost_1_55_0         boost_1_55_0.tar.gz.1  gsl-1.16         rivet-bootstrap-old
README-hannes  YODA-1.1.0         boost_1_55_0.tar.gz  fastjet-3.0.6          rivet-bootstrap  rivet-bootstrap.bck

so I do not yet have Rivet..... are you sure the problem comes from the rivet completion ?

Cheers
Hannes



On 10.06.2014, at 15:58, Andy Buckley <andy.buckley at cern.ch<mailto:andy.buckley at cern.ch>> wrote:

Hi Hannes. In answer to the last question... yes, but we're now very
close! YODA and Rivet are fully building, including the Python modules
so it's really the very last install step where something has gone wrong.

The issue now is a bug on our side, but a very minor and strange one
that I never heard of before. The installation of the bash_completion
script only happens if $prefix/etc/bash_completion.d exists, and I guess
that it has not existed for most Mac users so far. If it does exist then
in bin/Makefile.am we install it like this:

 install --mode 644 rivet-completion $(bashcomp_dir)/; fi

which works just fine on Linux. But on Macs the install command seems to
take different arguments (argh!), so the installation falls over with
the message that you got. I'm guessing here, but I think it will work
for you if you replace that line in Makefile.am with this:

 $(install_sh_DATA) rivet-completion $(bashcomp_dir)/; fi

Can you try this? Since the build has all completed, no need to re-run
the bootstrap script: just cd into the Rivet-2.1.2 build dir, make the
change, and call "make install". Cross fingers again ;-)

Or you could delete your $prefix/etc/bash_completion.d directory, but
that has downsides... and I'd like to know if this works. If so, it'll
be fixed in the next release. Thanks for helping, and persevering...
really close to success now!

Andy




On 10/06/14 15:42, Hannes Jung wrote:
Dear Andy

thanks a lot for the updates, now this works, but another error appears:
.....
running install_egg_info
Removing build/yoda-1.1.0-py2.7.egg-info
Writing build/yoda-1.1.0-py2.7.egg-info
CC="clang" CXX="clang++" CXXFLAGS="-Wno-sign-compare
-Wno-strict-prototypes" ARCHFLAGS=""  /usr/bin/python setup.py install
--prefix=/Users/jung/software/rivet --force
running install
running build
running build_py
running build_ext
running install_lib
copying build/lib.macosx-10.9-intel-2.7/yoda/__init__.py ->
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda
copying build/lib.macosx-10.9-intel-2.7/yoda/core.so ->
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda
copying build/lib.macosx-10.9-intel-2.7/yoda/script_helpers.py ->
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda
copying build/lib.macosx-10.9-intel-2.7/yoda/util.so ->
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda
byte-compiling
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda/__init__.py
to __init__.pyc
byte-compiling
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda/script_helpers.py
to script_helpers.pyc
running install_egg_info
Removing
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda-1.1.0-py2.7.egg-info
Writing
/Users/jung/software/rivet/lib/python2.7/site-packages/yoda-1.1.0-py2.7.egg-info
make[3]: Nothing to be done for `install-data-am'.
Making install in tests
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
Making install in bin
.././install-sh -c -d '/Users/jung/software/rivet/bin'
/usr/bin/install -c yoda-config yodacnv yodamerge yodadiff yodahist
yoda2aida yoda2flat aida2yoda aida2flat flat2yoda
'/Users/jung/software/rivet/bin'
if [[ -d "/Users/jung/software/rivet/etc/bash_completion.d" && -w
"/Users/jung/software/rivet/etc/bash_completion.d" ]]; then \
     install --mode 644 yoda-completion
/Users/jung/software/rivet/etc/bash_completion.d/; fi
install: illegal option -- -
usage: install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
              [-o owner] file1 file2
      install [-bCcpSsv] [-B suffix] [-f flags] [-g group] [-m mode]
              [-o owner] file1 ... fileN directory
      install -d [-v] [-g group] [-m mode] [-o owner] directory ...
make[2]: *** [install-data-local] Error 64
make[1]: *** [install-am] Error 2
make: *** [install-recursive] Error 1
~/jung/cvs/rivet2/build>


Hm.... is it only me, who has this enourmous problems with Rivet on a Mac ?

Cheers
Hannes



On 10.06.2014, at 11:10, Andy Buckley <andy.buckley at cern.ch<mailto:andy.buckley at cern.ch>
<mailto:andy.buckley at cern.ch>> wrote:

Hi Hannes,

Looks like this is a FastJet bug in OS X Mavericks, which was fixed last
year. From http://fastjet.fr/all-releases.html:

29 October 2013: fastjet-3.0.6 (manual, doxygen, fjcore) is a minor
maintenance release. Main changes:
fixed compilation issues for two plugins using clang (clang-500.2.79,
Apple LLVM version 5.0 based on LLVM 3.3svn) under OS X 10.9 (Mavericks)

We hadn't updated the fastjet version in our bootstrap script, because
until recently LCG had not installed releases later than 3.0.3, but I've
done it now. Re-download the bootstrap and try again... hopefully it'll
work this time.

By the way, on Mavericks I think it is still necessary to set

export CFLAGS=-Qunused-arguments
export CPPFLAGS=-Qunused-arguments

before running the bootstrap script, due to an OS X clang/Python bug:
see http://stackoverflow.com/a/22322645/91808 if you want details.
Otherwise it will fail late in the build as it tries to build the Rivet
or YODA Python modules.

Cheers,
Andy



On 10/06/14 09:24, Hannes Jung wrote:
Dear Riveters

still having problems to get rivet 2 installed on Mac OSX Mavericks

following the advice of Andy at our CMS meeting on Friday, I tried
to compile everything using clang and clang++ with the command:

INSTALL_PREFIX=$HOME/software/rivet CC=clang CXX=clang++ MAKE="make -j8"
./rivet-bootstrap


but then I got an error on fastjet:

libtool: compile:  clang++ -DHAVE_CONFIG_H -I.
-I../../../include/fastjet -O3 -Wall -g -Woverloaded-virtual -DDROP_CGAL
-I. -I./../../../include -MT libCDFcode_la-JetCluAlgorithm.lo -MD -MP
-MF .deps/libCDFcode_la-JetCluAlgorithm.Tpo -c JetCluAlgorithm.cc<http://JetCluAlgorithm.cc>
<http://JetCluAlgorithm.cc>
<http://JetCluAlgorithm.cc>  -fno-common -DPIC -o
.libs/libCDFcode_la-JetCluAlgorithm.o
JetCluAlgorithm.cc<http://JetCluAlgorithm.cc> <http://JetCluAlgorithm.cc>
<http://JetCluAlgorithm.cc>:81:16: error: use of
undeclared identifier 'abs'; did you
    mean 'fabs'?
        int dIEta = abs(iEtaSeedTower - iEtaPreClusterTower);
                    ^~~
                    fabs
/usr/include/math.h:431:15: note: 'fabs' declared here
extern double fabs(double);
            ^
JetCluAlgorithm.cc<http://JetCluAlgorithm.cc> <http://JetCluAlgorithm.cc>
<http://JetCluAlgorithm.cc>:82:16: error: use of
undeclared identifier 'abs'; did you
    mean 'fabs'?
        int dIPhi = abs(iPhiSeedTower - iPhiPreClusterTower);
                    ^~~
                    fabs
/usr/include/math.h:431:15: note: 'fabs' declared here
extern double fabs(double);
            ^
2 errors generated.
make[3]: *** [libCDFcode_la-JetCluAlgorithm.lo] Error 1


Any idea to solve this ?
Is this just a Mac problem ?

Thanks a lot
Cheers
Hannes



***********************************************************************
Hannes Jung
Email: Hannes.Jung at desy.de<mailto:Hannes.Jung at desy.de> <mailto:Hannes.Jung at desy.de>
<mailto:Hannes.Jung at desy.de>
mobile :+49 40 8998 93741
http://www.desy.de/~jung
Tel: +49 (0) 40 8998 3741
Fax: +49 (0) 40 8994 3741
DESY, CMS 01B/02.213
Notkestr.85, 22603 Hamburg, FRG
***********************************************************************






_______________________________________________
Rivet mailing list
Rivet at projects.hepforge.org<mailto:Rivet at projects.hepforge.org> <mailto:Rivet at projects.hepforge.org>
https://www.hepforge.org/lists/listinfo/rivet



--
Dr Andy Buckley, Royal Society University Research Fellow
Particle Physics Expt Group, University of Glasgow / PH Dept, CERN

***********************************************************************
Hannes Jung
Email: Hannes.Jung at desy.de<mailto:Hannes.Jung at desy.de> <mailto:Hannes.Jung at desy.de>
mobile :+49 40 8998 93741
http://www.desy.de/~jung
Tel: +49 (0) 40 8998 3741
Fax: +49 (0) 40 8994 3741
DESY, CMS 01B/02.213
Notkestr.85, 22603 Hamburg, FRG
***********************************************************************






--
Dr Andy Buckley, Royal Society University Research Fellow
Particle Physics Expt Group, University of Glasgow / PH Dept, CERN

***********************************************************************
Hannes Jung
Email: Hannes.Jung at desy.de<mailto:Hannes.Jung at desy.de>
mobile :+49 40 8998 93741
http://www.desy.de/~jung
Tel: +49 (0) 40 8998 3741
Fax: +49 (0) 40 8994 3741
DESY, CMS 01B/02.213
Notkestr.85, 22603 Hamburg, FRG
***********************************************************************




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.hepforge.org/lists-archive/rivet/attachments/20140610/8488414c/attachment.html>
Previous message: [Rivet] rivet 2 on Mac OSX
Next message: [Rivet] rivet 2 on Mac OSX
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Rivet mailing list